All Twister models look the same, but older models that have no serial number, or are below SN 3000 have greatly reduced speed range, horsepower, and serviceability compared to the “R” model.
While the LT-2AR is sturdy and reliable, please keep in mind that it is a polishing lathe with an aluminum bed. It is designed for dry applications ONLY! Let your full size lathe perform heavy-duty, or precision machining, and use the Twister for those troublesome deburring and edge breaking chores!
These options can be combined and are available on this product
Please select the options you want to add to the product
High Speed Model
It has a speed range from 0 to 3,500 RPM and is used for polishing very small parts. Due to the higher speeds involved this option results in slightly longer start / stop cycle times as well as slightly elevated spindle sound levels.
Variable Speed Foot Switch Model for Precise Control
The spindle speed can be controlled through both the machine front panel and its special foot switch. This frees up both hands while still having precise control of spindle speed.
Ultra Low Speed Model with Highest Torque
This Model offers a speed range from 0 to 800 RPM and has the highest torque of all of our models. It uses a 1/2" wide toothed belt and pulleys for no slip.
220 Volt Operation
Allows your Twister to operate on up to 250 Volts AC.
Twin Foot Switch Model for More Efficient Deburring & Lapping
It has two foot switches one for forward and one for reverse. Most often used for thread deburring and lapping as well as parts assembly.
Be the first to review this product